Northwestern Bell Excursion 36570 Manual Download | Manualshive

Page: 32 / 36

background image

31

02252A-1

6. Press UP or DOWN button to change, if needed. The specification

can be set to US, TAIWAN, BRAZIL, AUS or OTHERS.

7. Press OK button to confirm. "ARE YOU SURE?" will appear on LCD

display.

8. Press OK button again to save.
9. Press CANCEL button twice to return to standby mode

IMPROVING CORDLESS RECEPTION

Follow these guidelines to improve cordless sound quality:

Select an area to install the Excursion

®

36570 where it is closest to the

center of your home or office. This will improve the operating range of the unit.
Keep the Excursion

®

36570 base unit away from electrical equipment. Radio

Frequency Interference (RFI) is sometimes generated by these appliances,
which can cause degradation in cordless reception.
Keep the handset batteries charged as much as possible. Weak handset
batteries can limit the range of cordless operation.

MAXIMIZING BATTERY LIFE

Repeated use or recharge of Ni-MH batteries without periodic full discharge re-
sults in reduced useable charge time. When you notice the usable charge dura-
tion decreasing, fully discharge the Ni-MH battery and recharge as described:

DISCHARGING

1.

Unplug the telephone line cord from the Excursion

®

36570.

2.

Make sure that the adapter is connected.

3.

Lift the handset out of the base cradle.

4.

Press the OK (TALK) button of the handset and start discharging.

Once the symbol LOW BATTERY appears on the LCD Display, it means that the
battery level is low. Let it fully discharge for 12 hours. Once the Ni-MH battery is
fully discharged, you may now charge the battery to its full capacity.

CHARGING

1.

Make sure the adapter and telephone line cord are connected to the
Excursion

®

36570.

2.

Place the handset on the base cradle. The CHARGE LED indicator of the
base unit will light steadily.

3.

Leave the handset charging on the base for 14 hours continuously to get a
maximum charge.

4.

The Excursion

®

36570 is now ready for regular use. Discharge and charge the

Ni-MH battery again once you notice a decrease in the useable charge time.

36570/02252A-1.PUT

5/26/01, 11:35 AM

32

«
...
30
31
32
33
34
...
»

Summary of Contents for Excursion 36570





































Reviews:

No comments

Related manuals for Excursion 36570

DECT Elite 9035+1

Brand: Uniden Pages: 68

Brand: VTech Pages: 2

ena Yealink SIP-T46S

Brand: Zayo Pages: 2

Brand: AT&T Pages: 4

Brand: Radio Shack Pages: 24

Brand: Uniden Pages: 48

Brand: Sagem Pages: 64

XDECT 8005WP Series

Brand: Uniden Pages: 12

Business Series Terminal T7000

Brand: Nortel Pages: 4

Brand: Ultratec Pages: 33

Brand: Yada Pages: 14

Brand: DMGT Pages: 3

Brand: Yamaha Pages: 72

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 10

Brand: Panasonic Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands