6
1 Basic Safety Instructions
The CT901ME is exclusively designed for the finishing of wet concrete floors mainly on construction
sites.
Uses other than the manufacturer's instructions shall be considered as contravening the
regulations. The manufacturer shall not be held responsible for any resulting damage. Any risk shall
be borne entirely by the user. Observing the operating instructions and compliance with inspection
and servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the machine:
Read operator’s instructions
Ear protection and safety goggles must be
worn
Turn the knob in the indicated direction to
tilt (UP) or flatten (DOWN) the blades.
To prevent severe injuries, keep the feet and
fingers away from the rotating tool
1.2 Machine plate
Important data can be found on the following plate located on the machine:
Machine Model
Machine Code
Weight
Year of production
Maximum tool diameter
Machine type
Serial number Power
Safety standard Tool rotation speed
Do not apply
for CT901ME
