7
1.3 Safety instructions for particular operating phases
Before commencing work
•
Read the present operator’s instructions booklet carefully.
•
Before commencing work, make yourself familiar with the working environment at the place of
use. The working environment includes: obstacles in the area of work and manoeuvre, the
firmness of the floor, necessary protection at the site relating to public thoroughfares and the
availability of help in the event of accidents.
•
Check for correct mounting of the tool regularly.
•
Immediately remove damaged or badly worn tools, as they endanger the operator whilst
rotating.
•
Always use the machine with the safety guard ring, protection guards and electric box cover in
position.
•
Only fit NORTON blades or plates to the machine! The use of other tools can damage the
machine!
•
Attention is drawn to the use of BS2092 safety goggles in conformity with specified Processes
No.8 of the Protection of Eyes Regulation 1974, Regulation 2(2) Part 1.
Electrical powered machine
•
Always turn off the machine and separate it from the main source of electricity before any work
on the machine is done.
•
Make all electrical connections securely to eliminate contact of live wires with spray water or
dampness.
•
It is IMPERATIVE that you earth the machine properly. Let a qualified electrician check in case
of doubt.
•
In case of emergency, you can stop the machine by releasing the dead-man handle.
•
In the event of the machine breaking down or stopping for no apparent reason, switch off the
main electricity supply. Only a qualified electrician is allowed to investigate the trouble and
remedy the fault.
2 Machine description
Any modification, which could lead to a change in the original characteristics of the machine, may
be done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity
with the safety regulations.
2.1 Short description
The Mechanical Trowel CT901ME is designed for durability and high performance for onsite
finishing operations on wet concrete floors.
As with all other NORTON products, the operator will immediately appreciate the attention given to
detail and quality of materials used in construction. The machine and its component parts are
assembled to high standards assuring long life and minimum maintenance.
2.2 Purpose of use
The Clipper Mechanical Trowel CT901ME is designed for onsite finishing operations on wet
concrete floors. It is not designed for any other purpose.
