LineTro110Tµr User Guide
June 2011 Page 16 of 16
Test & Reset
The magnet must be kept at the yellow reset spot for minimum 2 sec to activate test or reset.
Battery monitoring
Battery Capacity monitoring (Yellow or amber LED)
TEST-sequence; all 5 LED’s flashes in a rotating sequence
1
2
3
4 (Amber)
5 (Green)
RESET-sequence
If the line is energised; the GREEN LED only flashes for 3 sec:
If the line is de-energised line; the RED LED’s only flashes for 3 sec:
3 s
3 s
2s
Test
sequence
2s
RESET
2s
Test sequence
2s
> 6 months
5-6 years
Battery
empty
f=1/10 Hz
Manual with magnet
Manual with magnet
2 (or 5) min (ref SW#1).
YELLOW LED only flashes for 2 (or 5) min (ref SW#1).
2 (or 5) min
2 (or 5) min
7 – 10 years
LED flashes and a “Fault” signal is sent to the Collector.
