background image

E

N

G

LI

S

H

3

IMPORTANT PRECAUTIONS

1. 

NEVER use an abrasive sponge, cloth or scouring pad on this appliance.

2. 

NEVER leave appliance unattended while in use.

3. 

Unplug unit from outlet when not in use and during cleaning.

4. 

DO NOT operate this appliance with a damaged cord or 

plug, or if the appliance ever malfunctions.

5. 

DO NOT clean any parts of this appliance in a dishwasher.

6. 

Keep out of reach of children. 

7. 

This appliance is NOT A TOY.

8. 

Unsupervised young children and cognitively challenged 

individuals should never operate this appliance.

9. 

Young children should be supervised while in proximity 

of the appliance to ensure their safety.

SAVE THESE INSTRUCTIONS!

IMPORTANT SAFEGUARDS

Basic safety precautions should always be followed when using 

electrical appliances, including the following:

1. 

Use this appliance only for its intended purpose as described in this instruction manual.

2. 

This appliance must be properly assembled according to the assembly instructions 

in this manual before it is used. See the Parts & Assembly section for more details.

3. 

This appliance must be connected to a proper electrical 

outlet with the correct electrical supply.

4. 

Proper grounding must be ensured to reduce the risk of shock and/or fire. 

DO NOT cut or remove the grounding plug. If you do not have a three-prong 

outlet in the wall, have a certified electrician install the proper outlet. 

5. 

Never unplug your appliance by pulling on the power cord. Always 

grasp the plug firmly and pull straight out from the outlet.

6. 

Immediately replace worn power cords, power outlets and loose plugs.

7. 

To reduce the risk of electric shock or fire, do not use extension cords 

or adapters to connect the unit to an electrical power source.

8. 

Unplug your appliance before cleaning or making any repairs.

9. 

We suggest that a certified technician perform the service 

if for any reason this product requires service.

10.  This appliance should not be recessed or built into an enclosed 

cabinet. It is designed for freestanding assembly only.

11.  Do not operate your appliance in the presence of explosive fumes.

12.  Do not tamper with the controls.

Summary of Contents for KEG9000DTSS

















Reviews:

Related manuals for KEG9000DTSS