manualshive.com logo in svg

Nostalgia Electrics KEGORATOR KRS-2000 SERIES, Instruction Manual

Introducing the Nostalgia Electrics KEGORATOR KRS-2000 SERIES, a must-have for beer enthusiasts. To ensure seamless operation and optimal performance, don't forget to grab your Instruction Manual, available for free download from 88.208.23.73:8080. Discover the perfect beverage experience with this high-quality product.

Share
Download
background image

7

Installation, contin.

STEP 6

After the backflow stopper has been 

inserted, there is a washer that should be 

placed on top of the coupler.

STEP 7

After the tap tower has been placed on the 

refrigerator and the hose line feeds through 

the bottom, attach the wing nut to the 

coupler.

O-rings on the CO2 line

CO2 line to 

regulator

CO2 line to coupler 

O-ring for coupler

O-ring for regulator

O-ring for tap

Tap tower washer 

goes in between 

refrigerator and tap 

tower.

CO2 tank band

Washers

Below are pictures of some of the extra washers that are included with the KEGORATOR™ 
and where they belong.

Summary of Contents for KEGORATOR KRS-2000 SERIES

















Reviews:

No comments

Related manuals for KEGORATOR KRS-2000 SERIES

Brands by name

Popular brands

Load more brands