ENGLISH
Replacing Glo Cone
™
Batteries
Each Glo Cone™ operates using three Alkaline AG3/LR41 button
batteries. Approximate battery life is up to two hours.
1. To remove the dead batteries, use a small Phillips head
screwdriver to remove the tiny screw from the compartment
where the batteries are held.
2. Remove the battery cover, and then the three button
batteries.
3. Replace the batteries with three Alkaline AG3/LR41 button
batteries. Be sure to insert the batteries with the correct
polarities. The “+” side of each battery must be touching the
“+” terminal.
NOTE
: NEVER mix old batteries with new batteries. Replace
all batteries at the same time.
4. Dispose of the old batteries according to your local laws and
ordinances.
CAUTION
: DO NOT dispose of in fire, recharge, put in
backward, disassemble, mix with used or other battery types
- may explode or leak and cause personal injury.
5. Replace the battery cover, and then insert the tiny screw in
the screw hole and tighten using a small screwdriver.
