ENGLISH
6
Assembling the Drip Tray
Now you are ready to enjoy cold, refreshing margaritas and
drinks from your MARGARITA & SLUSH MAKER!
HOW TO OPERATE
1.
First, find a stable surface near an electrical outlet before starting. Make sure the cord
is away from any water source. It is acceptable to use an extension cord if needed.
2.
DO NOT place the MARGARITA & SLUSH MAKER near the edge of a table or countertop.
3.
Fill the Blending Chamber with ice up to the max fill line. DO NOT exceed the max fill line.
4.
Add your favorite liquor, drink mix or fruit. You may choose to follow
one of the recipes included in this Instruction Manual.
5.
After adding ingredients, attach Lid firmly to the Blending Chamber.
6.
Plug in unit and turn ON by turning the side knob to the BLEND position.
7.
Blend for approximately 7-10 minutes or until mixture has reached the desired consistency.
8.
While the unit is still on, place a glass or a cup on the Drip Tray under
the Spout and dispense the drink by turning the Spout clockwise.
Turn Spout counterclockwise to stop dispensing beverage.
9.
NOTE: Always dispense beverage while unit is running.
10. When you have finished, turn side knob to OFF position and unplug unit.
Insert the three prongs of the Drip Tray into
the three holes on the Base of the unit. Make
sure Drip Tray locks firmly in place.
Drip Tray should be level to ensure that
cup does not sit at an angle.
