E
N
G
LI
S
H
10
HOW TO OPERATE
Before first use, clean the inside of the unit by wiping with a moist, non-abrasive
sponge, towel or cloth and then wipe with a non-abrasive dry towel.
1.
First, find a flat surface near an electrical outlet before starting. Make sure your cord
is away from any water source. It is acceptable to use an extension cord if needed.
2.
Before plugging in the unit, add ice cubes by removing the clear lid from the
Main Unit of your VINTAGE COLLECTION™ OLD FASHIONED SNOW CONE CART.
To remove the lid, simply push the release button on the lid, lift and remove.
3.
Plug in the appliance while switch is flipped to OFF position.
4.
When ice cubes are ready, place cubes in the shaving unit while allowing enough
room for the lid to be placed back on the unit easily. Never force it shut.
5.
Return the clear lid to the unit and turn the power button to the ON
position. This will activate the unit to begin shaving. Please note that
the ice will not shave unless the lid is properly secured.
6.
Repeat steps 2 and 3 until you have shaved the amount of ice desired.
Turn unit OFF and then unplug when you are finished.
7.
Once you have the desired amount of ice, open the housing door on the Main
Unit to retrieve your ice and create your favorite snow-based treats!
ON/OFF & Light
Switches
Cone Dispenser
Ice Hopper
Door Handle
Cone Holder
