background image

Introduction:

The tile cutting machine is designed to perform cutting jobs on small and

medium tiles (floor and wall tiles made of ceramic and similar material) which

suit the machine's size. It is intended in particular for use by DIY enthusiasts

and craftsmen. Do not use the machine to cut wood or metal! The machine is

to be used solely for its intended purpose. Any use other than its intended

use is a case of misuse. The user/operator and not the manufacturer shall be

liable for any damage or injury resulting from cases of misuse. Only those

cutting wheels suitable for the machine are to be used. Do not use saw blades!

For the machine to be used as intended it is also important to observe the

safety instructions, the assembly instructions, and the operating instructions

set out in this manual. All persons entrusted with operating and servicing the 

machine must be acquainted with the manual and must be informed about

the machine's potential hazards. The manufacturer can accept no liability

whatsoever for damages resulting from any modifications to the machine.

Specifications:

Motor: .....................500 Watts (2/3 HP), 110 V 60 Hz

RPM: ..................................................................3500

Max Cutting Height: ..........................................1-3/8"

Table Dims:  ...........................................15-1/2" x 15"

Height:  .................................................................6.8"

Diamond Wheel Dims: .....................7" x 5/64" x 5/8"

Notes:

Please read this manual carefully and follow the instructions. Use the manual

to familiarize yourself with the machine, its proper use and safety instructions.

WARNING! 

For safety reasons children, young people under the age of 16 years, and all

persons who have not read and understood the operating instructions should not use the tile

cutting machine.

Description of the Machine:

•   Portable tile cutting machine for small and medium tiles
•   Cutting performed by a diamond cutting wheel
•   Tilting work top up to 45 degrees
•   Cutting wheel cooled with water
•   Straight fence and mitre fence
•   Removable trough as cooling water container (to remove: pull out the trough as far as the

stop and then lift slightly to remove completely).

1

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for 1555811









Reviews: