3. Programming
Program Change – Level One
46
AFP-100/AFP-100E Instruction PN 51010:C1 02/06/2002
The ADJ (adjective) field may be loaded from the library list above and then modified letter-by-letter if
desired. Pressing the up or down arrow keys steps through the library. Once the up or down arrow keys
are pressed, the blinking cursor moves to the last character of the ADJ field, assuming that the user will
next want to move beyond this field.
Pressing a key on the 12-key pad changes the letter indicated by the blinking cursor. Any alphanumeric
character may be entered. Pressing the right or left arrow key moves the blinking cursor one letter right
or left. When the right arrow key is pressed with the blinking cursor on the last letter of the ADJ label,
the cursor will move to the first letter of the NOUN field.
Altering the NOUN field is done in a similar way. Use the up or down arrow keys to step through the
NOUN library which is listed below:
Table 4 Noun Library
In addition, the user may use the Recall/Increment function at any time when the cursor is on the first
letter of the ADJ or NOUN field as follows:
• If the
0
key is pressed, a '0' is placed in the first letter position.
• If the zero key is then pressed a second time with no intervening key actions, the entire ADJ field
is replaced with the field entered
for the previous device programmed
, and the cursor moves to
the last character of the field (Recall function). The Recalled ADJ or NOUN field may now be
changed letter-by-letter.
• If the
0
key is pressed again with no other intervening key actions and the last character in the
field is a number '0-9', the number is incremented by one. If the last character is a letter, it
changes to a '0'. If the last character goes from 9 to 0 and the characters to the left of the last
character are also numbers, they are also incremented (overflow).
• The above increment function may be repeated with each press of the
0
key
As an example, the user could quickly enter 'FLR_3_ROOM_305' as follows:
1. The cursor is on the first letter of the ADJ field. Press the
0
key twice to display 'FLR_3'.
2. With the cursor on the first letter of the NOUN field, press the
0
key twice to recall the display
'ROOM_304'. The cursor automatically jumps from the first to the last letter of the NOUN field.
3. With the cursor on the last letter of the NOUN field, press the
0
key again to increment the room
number to '305'.
4. Press the right arrow key to advance to the Zone field.
5. Select a zone number from 00 to 56. Z00 (default zone) is the general alarm zone. Z01 through Z56
may be selected to link software zones.
_________ (default of blanks)
BASEMENT_
BOILER_RM
CLASSROOM
CLOSET___
CORRIDOR_
ELECT._RM
ELEVATOR_
ENTRANCE_
FLOOR____
GARAGE___
HALLWAY__
HVAC_ROOM
KITCHEN__
LOBBY____
OFFICE___
PATIENT__
RESTROOM_
ROOM_____
STAIRWAY_
STOREROOM
WING_____
ZONE_____
Technical Manuals Online! - http://www.tech-man.com
