Notsi, Ltd., Bulgaria, 9027 Varna, Troleyna 12 street
Ph.: 00359 899 822010; Fax: 00359 52 507227
Web:
www.deltapulse.eu
; E-mail:
sales@deltapulse.eu
Mole LRL 3000D operating manual
16
Battery charge
: plug the jack of the charger into CHARGE 1 socket on the panel
and plug the charger into a 220V power source. The charger LED lights up red.
After charging the battery, the charger LED lights up green. Do the same with the
other two batteries.
If you have charged a battery and have to charge another one at night, this
should not bother you. The charger is automatic and no matter how many hours
it works after the battery is fully charged, neither the device, nor the battery will
get damaged. After charging is complete, unplug the charger from the 220V
power source, and then unplug the jack from the panel socket.
Caution
: When replacing the charger jack from socket 1 to socket 2 and 3,
unplug the charger from the 220V power source and then move the jack to the
next socket and reconnect the charger to the 220V power source.
Maintenance
: Do not use thinners to clean the device. Wipe it with a damp
cloth. Avoid causing shocks and wetting the device.
WARRANTY
The warranty terms and conditions are specified in the warranty card, and
exclude the following cases of improper use, such as:
1. Short circuit between the two transducer probes;
2. Incorrect connection of the poles of the external batteries;
3. Liquid damages;
4. Improper handling of the charger;
5. Hits, shocks or exposure to direct sunlight;
6. Unsealing of modules.
Good luck!