background image

Never use the appliance to dry clothes.

Do not connect the appliance to mains supply until completely assembled and adjusted.

Ensure hands are dry before handling the plug or main unit.

Ensure heater is on a flat, stable, heat-resistant surface.

Do not operate with cord set coiled up as a heat build up is likely, which could be sufficient to
become a hazard.

Carry out regular checks of the supply cord to ensure no damage is evident

Do not operate this appliance with a damaged cord, plug or after the appliance malfunctions
or has been dropped or damaged in any manner. Return to a qualified electrical person for
examination, electrical service or repair.

Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to
weaken and split. Always ensure that all cord has been removed from any cord storage area
and is unrolled before use.

It is recommended that this heater is plugged directly into the wall socket. Power boards are
not rated to supply power to high wattage appliances.

A correctly specified, undamaged extension cord may be used with this heater provided it is
used in a safe manner.

Do not remove plug from power socket until the appliance has been switched off.

Do not remove plug from power socket by pulling cord; always grip plug.

Do not place cord under carpet or cover with rugs or furniture. Arrange the cord so it cannot
be tripped over.

Don’t

place appliance on bedding or on thick & long carpet where the openings may get

blocked.

Switch off and use handle provided when moving

Do not place appliance close to radiant heat source.

Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may
cause an electric shock, fire or damage to the appliance.

Do not sit on the appliance.

Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet)
rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.

Do not operate in areas where petrol, paint or other flammable liquids are used or stored.

Do not use this appliance in the immediate surrounds of a bath, a shower, or a swimming
pool or other liquids.

The appliance must not be immersed in any liquids.

There are no user serviceable parts installed in the unit.

Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.

This unit is not supposed to be used in or around locations where foodstuffs, works of art or
delicate articles of science, etc are stored.

If your appliance does not work, or is not working properly, contact the place of purchase or
the Customer Services Team.

General Care and Safety Guide

Summary of Contents for NHMH205









Reviews: