NOVA FLEX LED, INC. WARNINGS AND WAIVER
• Any installation of this product should be completed by a professional licensed electrician pursuant to all applicable governing laws,
ordinances, regulations, national and local electrical and building codes.
• This is an electronic product which is susceptible to damage if handled incorrectly. Improper soldering or modification may result in a voided
warranty. Warranty cases will be made at Nova Flex’s discretion based on multiple factors.
• Do not allow product to be punctured or penetrated by foreign objects; this can result in a short circuit.
• Do not connect product directly to a 120 volt AC power source.
• For best performance, do not load the DC power source more than 80% of its labeled rating.
• Any use of this product is entirely at your own risk. Failure to utilize and install this product in its proper manner could result in severe injury and/
or property damage.
• Keep out of reach of children.
This product is provided by the manufacturer “as is” “with all faults” without any warranties or representations, express or implied, including,
but not limited to the warranties of merchantability or fitness for a particular purpose. In no event shall manufacturer be liable for any special,
incidental, punitive indirect or consequential damages of any kind. Manufacturer offers this product and the user accepts it subject to the foregoing
conditions, which may only be modified in a writing signed by the manufacturer.
See complete Terms & Conditions at novaflexled.com
LIGHTS ARE FLICKERING OR WILL NOT LIGHT?
l
Confirm polarity of wiring (make sure + and - are connected properly).
l
Check all connections to make sure they are secure and tight.
l
Ensure you are using a compatible dimmer and correct power supply.
Contact your distributer for technical support.
INSTALLATION GUIDE
RIBBON, NEON & CHANNEL
