background image

7

LITHIUM-ION BATTERY & 
CHARGER SAFETY

OVER CHARGING PROTECTION
This feature ensures that the battery is 
never overcharged. When the battery 
has reached its full charge capacity 
the charger will shut off protecting the 
internal components of the battery from 
being damaged. An internal component 
of the battery pack is an over discharge 
protector. This feature will stop the 
battery from discharging beyond the 
recommended lowest safety voltage.

OVER DISCHARGE PROTECTION
An internal component of the battery 
pack is an over discharge protector. 
This feature will stop the battery from 
discharging beyond the recommended 
lowest safety voltage.

OVER HEAT PROTECTION
The battery has an internal Thermister 
cut off sensor which will cease the 
charging cycle if the battery becomes 
hot during the charging process. This 
Thermister sensor will also stop the 
battery from operating should the 
battery become too hot during the 
operation of the tool. This can happen 
when the tool is overloaded or being 
used for extended periods of time.
Up to 30min in cooling time may 
be required depending on ambient 
temperature and operation being 
performed.

 while tightening and loosening nuts 
and bolts.
› Check that any socket to be used 
is not cracked or broken. Broken or 
cracked sockets are dangerous.
› If the ring securing the socket is 
damaged, the socket may come off 
during use causing personal injury.
› The torque delivered by the impact 
wrench depends on how long it is
applied, the size of socket and other 
factors such as the state of the battery 
charge.
› Use a torque wrench to check that 
the bolt has been tightened to the
appropriate level of torque.
› Stop the impact wrench before 
changing the direction of rotation. 
Always release the trigger switch and 
wait for the impact wrench to stop 
before switching the direction of 
rotation.
› Never touch the socket whilst it is 
turning. Do not let the turning socket 
get near your hands or any other 
part of your body. You could be cut or 
caught up in the socket.
› Do not touch the socket after it has 
been in use for an extended period. It 
could be hot and burn you.

Summary of Contents for NG-53

















Reviews: