Quick Start Guide
If you want to get more information & service about our printer, please visit English website www.nova3dprinter.com and we
also offer live chat through skype there, please feel free to contact us.
★ We offer free upgrade for our 3D printer, please upgrade your printer in time so that you can enjoy more and newest technology. How to upgrade
printer, please refer to "How to Upgrade Printer" in end of the article.
1. Connect Cables
Connect power cable to printer and power supply，then switch on printer.
2. Connect 3D printer to computer via Ethernet(2 methods)
For Model Bene2(L2120), if you just
want to print file directly for your
USB Card, you can ignore these and
following steps.
Note: Your file much be .SLC or .CWS
formats.
Method 1
: Network cable
Method 2:
Router(Note: Computer must be connected to the router)
For USB Card
3. Download slicing software "NovaMaker" on website www.nova3dprinter.com and install
Note: Your devices system must be Windows 7,8,10，MacOS
4. Printing Test(Print Test File that we uploaded into printer for you to test the machine)
Note: If the built platform move up and down and there is a image of print on LCD screen, the printer works well and you can go ahead with this testing
print.
Click A----B----C----D----E
A---Printer management interface of slicer
B---3D Printer connecting to slicer
C---Upload, delete and print files here
D---Printable files
E---Print files
F---Delete files
G---Upload files
