1
1. Please check all peripherals according the list before installation. To make sure
that the whole unit was not damaged and lost during shipping process. If you
encounter any problem, please contact your dealer.
2. Before installation, make sure all peripherals and computer have been turned
off.
3. The cabinet depth range must be in 504 ~ 1000 mm for 15
” and 17” console
(554 ~1000 mm for 19
” console). Contact your dealer for deeper cabinet
application.
4. The cabinet depth is 614 ~ 800 mm for 15
” and 17” (664 ~ 800 mm for 19”),
please refer to
“Step A”.
The cabinet depth is 504 ~ 614 mm for 15
” and 17” (554 ~ 614 mm for 19”),
please refer to
“Step B”.
The cabinet depth is 800 ~ 1000 mm, please refer to
“Step C”.
5. Reliable grounding of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to
the branch circuit.
1. Rail with front and rear bracket x 2 (Please identify the brackets. Right and left
sides are different.)
2. Extended bracket x 2
1
.
Installation
1.1
Install L CD 1U15-18 / 17-3 3 / 19-24 into Cabinet
1.1.1
Notes
1.1.2
Hardware kits contents:
www.RackmountMart.com
