novaG-A
Manual Service
24/25
1.2 Issue
Ref. NR-00016-ENG
WARNING:
To guarantee that the cylinder
block is correctly fixed, make sure that the
retention ring is perfectly housed in the
fixing groove. To avoid any possible error
in
assembly,
avoid
approaching
the
cylinder block when pressure is applied to
the gun after performing any cleaning,
repair or maintenance work.
9.
Fit the sleeve staple and fix it with the
screw to the rear of the gun.
10.
Fix the mixing block or head according to
the procedure described in the pistol
block unit and mix chamber assembly
section.
11.
Make sure you fit the o-ring between the
block and the sleeve, replacing it if it is
damaged.
12.
Start the gun.
