Novak Electronics, Inc.
|
Device Setup
1
1
4
4
www.teamnovak.com
INPUT HARNESS SENSOR
Sensor Description:
The Input Sensor Harness monitors the throttle or steering position.
Measurement Range:
-100% to 100%, 0 = neutral
Plugs Into:
The 3-pin connector plugs into the first or second slot in the
Novak Sentry Data Logger unit with the black wire toward the outside/left
edge of the case.
Default Settings
(
configurable setting
):
Graph Color:
Max Value
(Gauge display only)
:
NA
Name String:
Throttle
Installation Instructions
(refer to images shown right):
To measure throttle position:
Make sure one of the input harnesses is connected to the throttle
channel of the receiver. The other harness should be connected to
the speed control.
To measure steering position:
Make sure one of the input harnesses is connected to the
steering/servo channel of the receiver. The other harness should be
connected to the steering servo.
Replacement Part Number:
Novak Kit #
5315
(4 inch input harness)
Novak Kit #
5320
(9 inch input harness)
WARNING!
One of these sensors must be plugged into the receiver
. The Novak Sentry Data Logger
receives its power via the vehicle’s BEC or receiver pack.
Summary of Contents for DATA LOGGER
Page 1: ...Instruction Manual...
