2 Product Overview
2.2 Product Use
MOVIA, 2-Axis Scan Head – User Manual, 1040–0004 Rev. 03
6
Figure 2: Beam Direction
2.2
PRODUCT USE
The MOVIA scan head is delivered as an OEM component for integration into a
laser scanning system.
Customers must know and apply the rules and regulations for safe operation of
lasers when installing and operating the scan head and the system in which it is
used. Since Cambridge Technology has no influence over the employed laser or
the overall system, the customer is solely responsible for the laser safety of the
entire system.
The system manufacturer bears responsibility for complying with the standards
and guidelines required for the CE (European Conformity) label. Please contact
Cambridge Technology for further information about this product and applicable
guidelines.
2.3
PRODUCT CONFIGURATION
To identify the configuration of your product, refer to the product label located on
the side of the scan head. Information on the product label (Figure 3) identifies
the model name, laser wavelengths compatible with the scan head (λ), part
number (PN), and serial number (SN) of your product.
