VX4S/VX4 User's Manual
-7-
Setp3: Brightness
Return to the main menu interface. Press the Knob to select the corresponding value
of Brightness. You can rotate the Knob to adjust the value at this time.
Brightness
Screen Settings
Input Settings
Output Settings
25%
Brightness
Screen Settings
Input Settings
Output Settings
25%
Setp4: Output Settings
Output settings are divided into three cases:
First one: disable Scaling, i.e., the sizes of output image and input image are the
same, and original scale output is used. If the input resolution is smaller than the LED
display in one direction, LED display may not become bright in this direction; if the
input resolution is greater than the LED display in one direction, the input contents
may not be displayed completely in this direction. This option is applicable to the
application scenarios requiring point-to-point display. Horizontal offset and vertical
offset of images can be set according to the needs, and at this time the displayed
contents may move to the left or top at the LED display.
At this point
[Scaling]
is disabled.
Second one: Auto Fit�
At this point [Scaling] is enabled, and [Auto Fit] is enabled.
When enabling [Auto Fit], the input contents will be fully zoomed to the size of LED
display, and the input contents will be adaptive to the size of LED display. This mode
is suitable for full-screen playback of the contents.
Xi’an
NovaStar
Tech
Co.,
Ltd.
