VX4S/VX4 User's Manual
-10-
Image Mosaic
Factory Reset
Advanced Settings
Communication Settings
PIP
Redundancy
Advanced Attr
Presettings
Fn Settings
Audio Settings
Display Control
Inputs Backup
OLED Brightness
13
Hardware Version
V1�3�0�0
Output Resolution
Cabinet Settings
PIP
PIP
LAYOUT
Main Source
PIP Source
Disable
R+B
Height（V）
Start X
Start Y
128
0
128
0
Transparency
Window Swap
PIP Crop Settings
0
PIP
Redundancy
Advanced Attr
Presettings
Width（H）
Control the turn-on/off of PIP, Set input source of main screen and PIP, as well as
parameters of PIP.
Layout:
the position of PIP relative to main screen, including eight modes of layout
such as Custom, Left Top, Left Bottom, Right Top etc. When choosing any mode
except Custom , the values of horizontal and vertical offset of PIP are able to adjust
to the corresponding values of layout automatically. The meaning of each layout
mode is shown below:
Custom refers to that the size and position of PIP need to be set.
Left Top, Left Bottom, Right Top, Right Bottom, Center refer to that PIP overlaps
with the top-left corner, bottom-left corner, top-right corner, bottom- right
corner and center of main screen.
Top Bottom, Left Right refer to that main screen and PIP are distributed from top
to bottom or left to right.
Main source/PIP source:
Input source switching of main picture and PIP is the same as
the role of input source switching on the front panel.
Horizontal Res : Horizontal offset of PIP
Xi’an
NovaStar
Tech
Co.,
Ltd.
