VX4S/VX4 User's Manual
-5-
7 Operation instruction
The functions of VX4 are powerful with very simple operation, and multiple
operations can be completed with a knob and a return key. The design of more than
one shortcut keys makes operations more efficient.
Generally, the LED display can be used normally, and the brightness is moderate after
conducting the following four steps:
Input settings → Screen settings → Brightness →
Output settings
. Other menus such as screen control and senior setting can help users
better control LED display.
See the following section for details of operations.
Step1: Input Settings
Set resolution of input source signal. Resolution can be directly set and changed
for digital input interfaces DVI, HDMI and DP. Resolution can only be modified with
other input methods on input devices.
Input resolution can be set in two methods:
Method one:
Preset Resolution.
Selection is made in preset resolution of the controller. If there is no preset
resolution, you can select the second method and customize resolution.
Brightness
Output Settings
25%
Screen Settings
Input Settings
1024x768
1280x1024
1366x768
1440x900
Preset Resolution
Custom Resolution
Method two:
Custom Resolution.
Set Horizontal Res, Vertical Res and Custom· refresh rate and then select "Apply" and
press the knob for application. If the application is not confirmed, custom resolution
is invalid.
Width (H)
Height(V)
Custom Refresh Rate
Apply
1920
1080
60Hz
59.94Hz
50Hz
30Hz
Preset Resolution
Custom Resolution
Step2: Screen Settings
The precondition of Screen setting in shortcut is that the screen must be regular
rectangle (not special-shaped), cabinet must be regular rectangle and the size of
each cabinet are identical.
Step 1 The screen being power-on, if the cabinet is in normal display, enter into
Step 2; if the cabinet is in abnormal display, first, load the cabinet file, and
save it to the receiving card; see detailed operation in
Advanced Settings
;
Xi’an
NovaStar
Tech
Co.,
Ltd.
