- 4 -
RN-101M
NOVATEK-ELECTRO
When the current overload protection breaker trips, the load is disconnected from the mains, the LOAD
LED flickers, and the display shows the monitored voltage value. In this case, in order to connect load, the
protection breaker needs to be switched ON. The miniature circuit breaker reset button is at the top of the
device (black button). It will come up in short circuit condition and needs to be pressed down for resetting.
To avoid undesired fault tripping to minor and/or short-term undervoltage, the fixed minimal voltage
tripping time delay function is provided (7 s). When deep undervoltage occurs (more than 60V below minimal
voltage setting ore voltage drops below 165V), the relay trips within 0.12 sec.
When the relay is energized, the display shows “StA” indication shortly, and then the relay switches to the
AR delay mode.
5 WARRANTY
The manufacturer guarantees trouble-free operation of RN-101M device within thirty six months after the
date of sale on the following conditions:
- proper installation;
- manufacturer’s QC department inspection seal is intact;
- integrity of the device case, no traces of mechanical damage, case opening, cracks, chipping, etc.
