- 10 -
REV-201М
NOVATEK-ELECTRO
4
0
– 1 min
0
– 10 min
5
0
– 10 min
0
– 100 min
6
0
– 100 min
0
– 1 hour
7
0
– 1 hour
0
– 10 hours
8
0
– 10 hours
0
– 20 hours
NOTICE:
Note
– when arranging the time settings by the potentiometers 2, 3 (figure 1) it is necessary to note
that there is so called “dead” zones on the range extremes as a result of potentiometers construction feature.
2.1.3.
Connect REV-201M as shown on Figure 9 depending on the chosen operation mode (Paragraph 1.1.)
QA
-
automatic circuit breaker with the breaking current of 5 A not more.
Figure 9
– Wiring diagram depending on required operation mode
ATTENTION!!!
It is strictly prohibited to use simultaneously both power supply inputs for 24V DC and
mains 230/240 VAC. Only one power supply input should be used.
2.2 USAGE AND OPERATION OF REV-201M
Connect the power supply to the input terminals of the REV-201M. Turn
ON
the device.
GREEN
LED indicator
of the corresponding channel should glow and timing countdown begins in accordance with the user-selected
operation algorithm (see paragraph 2.1.1).
When the output relay is turned
ON
(closed state of the contacts
1
-
2
(
Channel 1
) and contacts
4
-
5
(
Channel 2
)
– then LED indicator change the color and start glowing
RED
.
3 SAFETY PRECAUTIONS and TECHNINAL MAINTAINANCE
3.1 SAFETY PRECAUTIONS
Power off the unit, as well as any other units connected to it, before maintenance,
trouble-shooting or installation works.
