background image

- 11 - 

NOVATEK-ELECTRO

                                                                                     REV-201М

     

                                                                                                                                                       

 

3.1.2 Do not expose the inner electric components of the unit, as well as input contacts of terminal blocks and 

sockets, to water. 

3.1.3 Switching, adjustment and maintenance of the unit should be conducted by the qualified personnel, who 

is familiar with the provisions of this user manual. 

3.1.4 The following regulations should be enforced while operating and maintaining the unit: "Operational 

regulations of Electrical Installations", and "Safety Regulations for the Operation of Electrical Installations". 

 

3.2 TECHNINAL MAINTAINANCE  
 

It is recommended to perform technical maintenance every 6 months of use.  

The maintenance procedure includes visual inspection to verify the connection of cables to the REV-201M 

terminals, as well as the absence of fractures and cracks on the case. 

Do not use abrasives or organic compounds for cleaning (spirit, gasoline, solvents, etc.). 

All safety regulations provided under section 3.1 should be enforced during the maintenance. 

 

4  PRODUCT LIFETIME WARRANTY AND STORAGE CONDITIONS 

 

4.1 Service life 

– is 10 years. Contact manufacturer upon the expiry of the service life. 

4.2 Guaranteed storage life 

– is 3 years.  

4.3 Warranty period 

– is 5 years from the date of sale. 

The manufacturer shall provide a free repair of the unit within the warranty period if all the provisions of user 

manual were complied with by the consumer. 

The unit shall not be subject to warranty service in the following cases: 

  end of warranty period; mechanical damage; 

  traces of moisture or foreign objects inside the unit; traces of tampering; 

  damage by electric shock at a voltage, which is higher than maximum permissible voltage, as indicated in 

the user manual. 

4.4 Warranty service shall be provided at a place of purchase. 
4.5 The manufacturer's warranty does not apply to compensation for direct or indirect damages, loss or injury 
associated with transporting the unit to the place of purchase or to the manufacturer. 
4.6 Post-warranty service is provided by the manufacturer. 

Users are earnestly requested to indicate the reason for the return in case of a return of the unit or transferring unit for 

warranty or post-warranty service in a special field.

 

 

5  TRANSPORTATION 

 

REV-201M in the shipping box should be stored indoors at a temperature of -45 to +60 

°C and relative humidity 

of no more than 80% with no vapors available in the air, capable of producing harmful effect on the shipping box 
and unit materials. 

When transporting REV-201M, the user should provide some protection against mechanical damage 

 

 

ACCEPTANCE CERTIFICATE 

 

REV-201M was inspected and approved for the safe operation and use by the quality assurance department. 
            

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

VN160722 

 

 

Summary of Contents for REV-201?












Reviews: