background image

CLIENT:
Bell

DOCKET NUMBER:
112-LBMCBMU9595

AD NUMBER:
U9595

FILE NAME:
U9595_U998_Bil Book_PS.indd

DESCRIPTION:
Novatel U998 Packaging

FILE STARTED:
Aug. 24, 2009

PUBLICATION(S):
Book

MECHANICAL SIZE:  (File built at 100% of production size, 1” = 1”)
Bleed:  5.25” x 6.943”  •   Trim:  5” x 6.693”  •   Live: None
Actual Trim: 5” x 6.693”

ART DIRECTOR:
Caio O

COPYWRITER:
NA

PHOTOGRAPHER:
NA

STUDIO ARTIST:
Cheryl

PRINT PRODUCTION:
Kim Burchiel

SHIPPING DATE:
None

TODAY’S DATE & REV#:
None

COLOURS:
Special Blue + 4C

Leo Burnett
175 Bloor Street E. North Tower, 12th Floor
Toronto, ON M5W 3R9   (416) 925-5997

17

17

Regulatory information

This device has been tested to and conforms to the essential regulatory requirements of the European 

Union R&TTE directive 1999/5/EC and has attained CE Marking.

Federal communications commission notice (Fcc United states)

This equipment has been tested to, and found to be within the acceptable limits for a Class B  

digital device, pursuant to part 15 of the FCC Rules and Industry Canada ICES-003. These limits  

are designed to provide reasonable protection against harmful interference when the equipment  

is operated in a residential environment.
This equipment generates radio frequency energy and is designed for use in accordance with the 

manufacturer’s user manual. However, there is no guarantee that interference will not occur in any 

particular installation. If this equipment causes harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, you are encouraged to try to correct the 

interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna. 
•  Increase the separation between the equipment and the receiver. 
• Consult the dealer or an experienced radio/television technician for help.
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules and Industry 

Canada ICES-003. Operation is subject to the following two conditions:
•  This device may not cause harmful interference. 
•  This device must accept any interference received, including interference that may cause undesired 

operation.

waRninG:

 DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF. 

SUCH ACTION MAY VOID THE WARRANTY. THE OVATION DEVICE IS FACTORY TUNED. NO CUSTOMER 

CALIBRATION OR TUNING IS REQUIRED. CONTACT YOUR SERVICE PROVIDER FOR INFORMATION ABOUT 

SERVICING YOUR WIRELESS COMMUNICATION DEVICE.

notE:

 The Radio Frequency (RF) emitter installed in your modem must not be located or operated 

in conjunction with any other antenna or transmitter, unless specifically authorized by Novatel Wireless 

Technologies.
MODIFICATIONS: Any changes or modication not expressly approved by Novatel Wireless, Inc. could void 

the user’s authority to operate this equipment.
The FCC has granted an Equipment Authorization for this wireless modem with all reported SAR levels 

evaluated as in compliance with the FCC RF exposure guidelines.
FCC Equipment Authorization ID: NBZNRM-MC998D
In order to comply with FCC RF exposure requirements, the device must be installed so that a minimum 

separation distance of 0.5 cm (0.2”) is maintained between the antenna and all persons during ordinary 

operating condition.

safety notices  

Do not operate your Ovation MC998D in any area where medical equipment, life support equipment, or 

near any equipment that may be susceptible to any form of radio interference. In such areas, the host 

communications device must be turned on. The MC998D may transmit signals that could interfere with 

this equipment.

On an aircraft, either on the ground or airborne 

In addition to FAA requirements, many airline regulations state that you must suspend wireless 

operations before boarding an airplane. Please ensure that the host device is turned o and your Ovation 

MC998D is removed from the USB port prior to boarding aircraft in order to comply with these 

regulations. Ovation MC998D can transmit signals that could interfere with various onboard systems and 

controls.

While operating a vehicle

The driver or operator of any vehicle should not operate a wireless data device while in control of a 

vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In some 

countries, operating such communications devices while in control of a vehicle is an offense.
Note: Please consult the User Guide for complete regulatory and safety information, available at  

www.novatelwireless.com

Marque 

cE

Cet appareil a été testé selon les exigences r

églementaires essentielles de la dir

ective R&TTE 1999/5/EC 

de l’Union Européenne et il a été déclar

é conforme à ces exigences. Il a r

eçu la marque CE.

avis de la F

cc (F

ederal 

communications 

commission des États-Unis)

Cet équipement a été testé selon les limites acceptables pour un appareil numérique de classe B, alinéa 

15 des règles de la FCC et d’industrie Canada ICES-003 et a été déclar

é conforme à ces limites. Ces 

limites sont conçues pour fournir une pr

otection raisonnable contr

e les interférences nocives lor

sque 

l’équipement fonctionne dans un envir

onnement résidentiel.

Cet équipement génère de l’éner

gie de fréquence r

adio et est conçu pour une utilisation en accord avec 

le manuel d’utilisation fourni par le fabricant. Cependant, il n’existe aucune gar

antie que l’interférence ne 

se produir

a pas dans une installation particulière quelconque.

Si cet équipement produit des interfér

ences nocives à la réception r

adio ou télévision, ce qui peut être 

déterminé en désactivant et réactivant l’équipement, nous vous encour

ageons à éliminer l’interférence 

en prenant une ou plusieur

s des mesures suivantes :

• Modifier l’orientation de l’antenne de réception ou la changer de place

• Augmenter la distance entre l’équipement et le r

écepteur

• Consulter le revendeur ou un technicien r

adio/télévision qualifié pour obtenir de l’aide

Cet appareil est conf

orme à l’alinéa 15 des règles de la F

ederal Communications Commission (FCC) et à 

la norme d’industrie Canada ICES-003. Son fonctionnement est sujet aux deux conditions suivantes :

• Cet appareil ne doit pas pr

oduire d’interfér

ences nocives.

•  Cet appar

eil doit accepter toutes interférences r

eçues, notamment les interférences qui peuvent 

entraîner un f

onctionnement indésirable.

aVER

tissEME

nt :

 NE TENT

EZ PAS DE RÉPARER L’APPAREIL DE COMMUNICATION SANS FIL VOUS-MÊME. 

VOUS POURRIEZ ANNULER LA GARANTIE. L’APPAREIL OVATION EST RÉGLÉ EN USINE. AUCUN CALIBRAGE 

OU RÉGLAGE PAR LE CLIENT N’EST REQUIS. CONTACT

EZ VOTRE PRESTAT

AIRE DE SERVICE POUR PLUS 

D’INFORMATIONS À PROPOS DE L’ENTRETIEN DE VOTRE APPAREIL DE COMMUNICA

TION SANS-FIL.

REMa

RQUE :

 l’émetteur de fréquences r

adio (RF) installé sur votre modem ne doit pas êtr

e situé près de 

tout autre émetteur ou antenne ni utilisé en conjonction avec un autr

e émetteur ou antenne, sauf si 

spécifiquement autorisé par Novatel Wireless T

echnologies.

MODIFICATIONS : T

out changement ou modification non expressément appr

ouvé par Novatel Wireless, 

Inc. peut annuler les droits de l’utilisateur à fair

e fonctionner cet équipement.

La FCC a accordé une autorisation d’équipement (Equipment Authorization) pour ce modem sans-fil, tous 

les niveaux SAR reportés ayant été évalués et déclar

és conformes aux consignes concernant l’exposition 

établies par la FCC RF.

ID FCC d’autorisation d’équipement : NBZNRM-MC998D

Afin de respecter les exigences d’exposition aux r

adiofréquences établies par la FCC, l’appar

eil doit être 

installé de sorte à ce qu’une distance de séparation minimale de 0,5 cm (0,2 pouces) soit maintenue 

entre l’antenne et toutes per

sonnes au cours du f

onctionnement ordinair

e de l’appareil.

consignes de sécurité

N’utilisez pas votre Ovation MC998D à pr

oximité d’équipement médical, d’équipement de maintien des 

fonctions vitales ou pr

ès de tout équipement qui pourrait êtr

e affecté par toute forme d’interfér

ence 

radio. Dans de tels endr

oits, l’appareil de communications hôte doit r

ester éteint. Le MC998D peut 

transmettr

e des signaux qui pourraient interfér

er avec cet équipement.

À bord d’un avion, au sol ou dans les air

s

Outre les exigences de la FAA, de nombr

eux règlements de lignes aériennes spécifient que vous devez 

suspendre le f

onctionnement de vos appareils sans fil avant de monter à bor

d d’un avion. Afin de 

respecter ces r

èglements, veuillez vous assurer que le périphérique hôte est éteint et que vous avez 

retir

é votre Ovation MC998D du port USB, avant de monter en avion. L’Ovation MC998D peut 

transmettr

e des signaux qui pourraient interfér

er avec divers systèmes et contr

ôles à bord.

Lorsque vous utilisez un véhicule

L’utilisation d’appareils de données sans fil est déconseillée aux conducteur

s de tout véhicule. Ils 

pourraient êtr

e distraits et per

dre le contr

ôle du véhicule. Dans certains pays, l’utilisation de tels 

appareils de communications lor

s de la conduite d’un véhicule repr

ésente une offense.

Remarque : veuillez consulter le Guide d’utilisation pour des inf

ormations exhaustives sur les régulations 

et la sécurité. Vous tr

ouverez ce guide sur le site W

eb 

www.novatelwireless.com

T:10”

T:6.693”

F:5”

FS:4.75”

F:5”

U9595_U998_Bil Book_PS.indd   35-36

08/09/09   11:25 AM

Summary of Contents for Bell U998 Turbo Stick




















Reviews: