2
3. Attach the antenna to the surface using the four mounting screws supplied. The o-ring will compress
and create a seal between the surface and the antenna.
Ref. #
Description
1
Antenna
2
Countersink screws
3
Mounting surface
4
O-ring
5
Drilled mounting holes
4. Remove the dust cap from the antenna’s TNC connector.
5. Attach the male TNC connector of the coaxial cable to the antenna’s TNC connector.
Ref.#
Description
1
Antenna screwed into place
2
Surface
3
TNC connector (male)
4
Coaxial cable (female)
6. Attach the other end of the coaxial cable to the antenna input port of the receiving device. The
receiving device must be able to provide power as detailed in the
SPECIFICATIONS
section of this
guide. All NovAtel GNSS receivers provide the necessary power through their antenna RF connectors.
