58
LAN
The LAN page gives you settings and information about the MiFi 5510's network. The LAN menu
contains the following sections:
•
IPv4
•
IP address
— The IP address for the MiFi 5510.
•
Subnet mask
— The subnet mask network setting for the MiFi 5510. The default value
255.255.255.0 is standard for small (class "C") networks. If you change the LAN IP Address,
ensure you use the correct Subnet Mask for the IP address range containing the LAN IP
address.
•
MAC address
— The Media Access Controller (MAC) or physical address for the MiFi 5510.
•
Enable DHCP server
— The
Enable DHCP Server
checkbox enables or disables the DHCP
Server feature.
•
Start DHCP address range at
— The start range of IP addresses reserved for use by the
MiFi 5510's DHCP server table.
•
DHCP address range
— The current range of IP addresses reserved for use by MiFi 5510's
DHCP server table. If a device with a static IP address wants to connect to MiFi 5510's
network, the static IP should be outside of the DHCP address range. Most devices do not
have a static IP.
•
IPv6
•
Enable IPv6
— The
Enable IPv6
checkbox enables or disables the IPv6 feature.
•
Link-Local address
— Displays the local address when IPv6 is enabled.
Summary of Contents for MiFi 5510
