E
ProPak II Enclosure
70
GPS/GLONASS Receiver User Manual Rev 1
E.4
OTHER OPTIONAL PROPAK II ACCESSORIES
E.4.1 BATTERY ASSEMBLY (NOVATEL PART NUMBER 01016698)
The optional NovAtel battery for the ProPak-II (NovAtel part number 01016698), see Figure E.5, has been selected
to offer the best compromise between availability, ease of maintenance and duration of operation. It should be
handled with care, and prevented from being severely knocked or dropped.
Figure E.5 Battery Assembly
WARNING: Be sure that the battery is positioned upright during the charging process – it must not be upside-
down, as this will damage the battery.
Figure E.6 Battery Cap
The battery cap (A) is designed to allow you to change the battery fuse without removing the cap. The cap, see
Figure E.6, is raised in the center with a flat edge that contains two lemo connectors (B) and the fuse holder (C).
The fuse holder is located between the two lemo connectors, and it is easily opened with a flat head screwdriver,
enabling you to quickly gain access to, and change, the fuse.
The life of this type of battery is typically between one to four years, depending on the amount of usage. If it
becomes necessary to replace the battery you can purchase a complete battery assembly from NovAtel; otherwise
the following procedure is recommended.
1. Select a sealed lead-acid battery having the same or comparable ampere-hour (A-h) rating.
2. Remove the existing positive lead ( and colored red) and negative lead (marked “–” and colored
black).
3. Insert the RED (+ positive terminal) lead of the battery cable onto the RED (+ positive terminal) of the
battery. Insert the BLACK (– negative terminal) lead of the battery cable onto the BLACK (– negative
terminal) of the battery.
4. Secure battery cap to battery using velcro straps.
5. Recycle the old or worn battery by contacting your local recycling authority, or NovAtel (1-800-
NOVATEL), for instructions on proper disposal. This battery is a recyclable product and should NOT be
discarded in a landfill site.
