OEM6 Family Installation and Operation User Manual Rev 7
15
Chapter 1
Introduction
1.1
Overview of the OEM6 Family of Cards and Enclosures
The OEM6 family offers Global Navigation Satellite System (GNSS) receivers and integrated L-Band
capability. The OEM6 family supports existing and planned GPS, GLONASS, QZSS, BeiDou and Galileo
frequencies and is capable of full code and Real-Time Kinematic (RTK) positioning. OEM6 boards are
designed for flexibility of integration and configuration. NovAtel enclosures are compact and lightweight
and easy to integrate.
For further information about OEM6 receiver boards, refer to the product brochures at
1.1.1
OEM6 Family Receiver Cards
•
OEM615
•
OEM617D
•
OEM628
•
OEM638
,
,
for details.
1.1.2
OEM6 Receiver Enclosure
•
FlexPak6
for details.
1.2
Related Documents and Information
After the OEM6 hardware is operational, the
OEM6 Family Firmware and Reference Manual
(OM-20000129) becomes the primary source for command and log information
.
Each receiver has a
specific set of features, such as L-Band or GLONASS support, so some commands and logs may not be
supported by your model. Refer also to our web site
for the latest
documentation.
This manual does not cover OEM6 service and repair. Contact a local NovAtel dealer for service or repair
inquiries (refer to
Customer Support on page 14 for contact details)
.
1.2.1
OEM615 Receiver
The OEM615 has the same form and fit as NovAtel’s OEMV-1™ receivers, with the following additional
features:
• Dual-frequency: L1, L2 and L2C for GPS
and GLONASS
• Smallest form factor
• Multi-constellation: E1 for Galileo and B1
for BeiDou
• Low power consumption
• UART LVTTL and USB communications
port
• GLIDE, RT-2 and ALIGN positioning
options