19
novatelwireless.com
Double-Sided Tape
If securing the device using double-sided tape or a method not described in this manual, note
the following precautions:
l
Excessive force in the middle of the device may cause damage to the device.
l
If using rigid mounting hardware, apply pressure only to the ends of the device. Limit
the mounting pressure only to the amount needed to secure the device.
Vehicle Mounting
Follow the steps and guidelines in this section if you are Mounting the SA 2100 in a Vehicle.
Novatel Wireless recommends the SA 2100 vehicle installation should be carried out by a
qualified automotive electronic accessory technician.
Always mount the device with the battery compartment facing downward..
Ground should be connected first. Failure to connect ground to the SA 2100 before
connecting auxiliary devices may result in damage to the attached I/O device.
To ensure proper accelerometer operation, you must securely mount the SA
2100. Mounting the device to cable runs or other structures that may allow the
device's orientation to shift may cause inaccurate results to be reported by the
accelerometer.
For optimal performance, note the following mounting precautions/guidelines:
l
Choose a location where metal or cable bundles will not shield the device.
l
Avoid possible interference by mounting the device away from radio or speaker wires.
We suggest you mount your device in one of the following locations:
l
Above the air vents
l
Above the instrument cluster
l
Above the glove box
Do not mount the device in the following locations:
l
Engine bay
l
Near or in the path of a vehicle's airbag