43
novatelwireless.com
Normally, the firewall will block incoming IPv6 connection requests intended for an IPv6-
enabled connected device.
If you wish to allow these incoming connection requests to reach the intended connected
device, enable this setting.
DMZ (IPv4)
If enabled, then the connected device specified as the DMZ IP address (DMZ destination) will
receive all traffic which would otherwise be blocked by the firewall. This may assist some
troublesome network applications to function properly, but the DMZ device should have its
own firewall to protect itself against malicious traffic.
DMZ checkbox
Use this to enable and disable this feature as needed. Generally, DMZ should
be disabled unless absolutely necessary.
DMZ IP Address
Enter the IP address of the connected device you wish to become the DMZ
device (DMZ destination) into this field. You can check the IP address of each connected
device on the connected devices screen.