44
novatelwireless.com
Settings Page > Advanced Settings > MAC Filter
Figure 3-16 Settings Page - Advanced Settings - MAC Filter
If the MAC Filter feature is enabled it will prevent access to this network by any device which
is included in the "Allowed Devices" list. The filter applies to both Wi-Fi and Ethernet
connections. For a computer, Wi-Fi and Enternet interfaces are listed separately, so one
interface could be allowed while the other is not.
ON/OFF
: Use this control to enable or disable the MAC Filter as needed. Before enabling it,
you need to ensure the "Allowed Devices" list is not empty. Note that when enabling the MAC
Filter, any Connected Device which is not in the "Allowed Devices" list will immediately be
disconnected.
Allowed Devices
: All allowed devices are listed here. Any device can be edited (change
name or type) or be deleted from the list.