Technical Specifications
Appendix A
SUPERSTAR II User Manual Rev 3
45
* Specifications are subject to change without notice
Input Messages:
COM1: NMEA or proprietary binary
COM2: RTCM SC-104 types 1, 2, and 9
Output Messages:
COM1: NMEA or proprietary binary
(NMEA types GGA, GSA, GSV, RMC, ZDA, GLL plus
proprietary messages)
Time Mark Output:
1PPS, aligned with GPS time (± 200 ns typical in absolute
mode)
Discrete:
3 general purpose input/output lines
PHYSICAL AND ENVIRONMENTAL*
Dimensions:
46 x 71 x 13 mm
Weight:
22 g
Operating Temperature:
-30°C to +75°C
Storage Temperature:
-55°C to +90°C
Humidity:
5% to 95% relative humidity, non-condensing to +60°C
SUPERSTAR II DEVELOPMENT KIT*
Input Voltage:
+6 to +18 VDC
Waterproof Connectors:
Power:
3-pin (Deutsch part number: 58064-08-98SN)
COM1:
13-pin (Deutsch part number: 59064-11-35SF)
COM2:
13-pin (Deutsch part number: 59064-11-35SF)
RF Input: Female TNC
Accessories Included:
A FlexPak-SSII enclosure containing a SUPERSTAR II
receiver (see
Appendix B
starting on
Page 49
)
A +12 dB active GPS antenna with a magnetic mount and a
6 m RF cable
Power cable with an automotive adapter
Null-modem serial cable with DB-9 connector
