FlexPak-SSII Specifications
Appendix B
SUPERSTAR II User Manual Rev 3
55
B.3
StarView Software Installation
Once the receiver is connected to the PC, antenna, and power supply, install the
StarView
software
.
The
StarView CD is
supplied with the development kits, otherwise
StarView
is available on our website (see
below
).
From CD:
1. Start up the PC.
2. Insert the
StarView
CD in the CD-ROM drive of the computer.
3. Install the
StarView
software and follow the steps on the screen. If the setup utility is not
automatically accessible when the CD is inserted, select
Run
from the
Start
menu and press the
Browse
button to locate Setup.exe on the CD drive.
4. Click on the
OK
button to install the
StarView
software and follow the steps on the screen.
From our website:
1. Start up the PC and launch your internet service program.
2. Go to our website at http://www.novatel.com/Downloads/fwswupdates.html and scroll down to
the
Other Application Software
section.
3. Download the
StarView
setup program and save it in a temporary directory (for example, C:\temp).
4. Use the setup program to install the
StarView
software by following the steps on the screen.
After installation,
StarView
also appears in the Windows Start menu at
Start | Program Files | NovAtel L1
Software.
