22
English
19
Status Bar: displays various status messages.
20
Virtual Deck: rotates during playback.
21
Tempo-Matching Display: displays tempos of both Decks to help the mixing process.
22
Beat-Matching Display: shows “transients” (usually the drum hits) to aid beat-matching.
23
Waveform: waveforms of the currently loaded tracks. The top waveform is that on Deck A;
the bottom is that on Deck B.
24
Track Overview: an overview of the currently loaded track’s entire waveform.
25
Track Name: “Title” tag for the current track.
26
Artist Name: “Artist” tag for the current track.
27
key: Displays the track’s “key” ID3 tag (if available).
28
BPM Field / Tap: displays track’s BPM. If there is no BPM for the track, it will display “Tap”
to prompt you to tap out a suggested tempo.
29
Time Elapsed / Time Remaining: displays the current position of the Audio Pointer in the
track, either in terms of elapsed or remaining time. Click to toggle between the two.
30
Pitch: shows applied pitch offset as a percentage (%) set by the PITCH control
37
])
31
Clock: display the computer’s internal real-time clock
32
Playback Mode: toggles between “Single” and “Continuous” Playback Modes. SINGLE
Mode plays only one track, stopping when it is finished. CONTINUOUS Mode will
automatically play the next track in the Crate when one track ends. This setting remains the
same even when a new track is loaded.
33
Repeat Mode: toggles Repeat Mode On/Off for the track (when Playback Mode is set to
SINGLE) or Crate (when Playback Mode is set to CONTINUOUS). When a new track is
loaded, Repeat Mode defaults to OFF.
34
Loop Range: displays the range of any currently selected Auto Loop or Loop Roll.
35
Rescan ID3 Tags: re-reads file tags for the entire Library. Use this function if you have
edited or modified file tags in other software.
Tip: Rescanning the tags is a handy way to identify any files that cannot be found (for
instance, if the files have been re-named or moved). These tracks are shown red in the
Library pane, with a “?” icon in the Status column.
36
Relocate Lost Files: if you have moved files which are already in your Library, they will
show up as ‘not found’ (denoted by a “?” icon in the Status column) and be displayed in red.
Drag and drop a folder from Finder (Mac) or Explorer (Windows) onto this button to search
it, and any sub-folders, for these files. Doing this will update the Library with their new
location. You can also click this button to scan your whole file system, including external
drives connected to your computer, for missing files.
37
Effect: the currently selected effect applied to the channel (deck or master.). When
browsing for a different effect to apply to the Deck, the name of the effect will be shown in
this box (in a different colour).
38
FX Mix: the amount of current effect.
39
Parameter: the parameter for the current effect, which can be adjusted with the parameter
knob. Generally, this is the intensity of the effect but may vary between effects.
40
Tempo Source: the current BPM for the track, which helps determine the speed of the
current effect (if it is rate-based). When this field reads “AUTO A” or “AUTO B,” the effect will
automatically follow the BPM of the track on Deck A or Deck B, respectively. If “MANUAL”
is shown, it means neither Deck’s track has a BPM. You can set the BPM (and change it at
any time) by using the TAP TEMPO button. You can also return to the track’s auto-BPM by
holding down TAP TEMPO.
Summary of Contents for TWITCH
Page 1: ...TWITCH User Guide FA0257 01 ...
Page 10: ...10 English TWITCH Overview ...
