4.4.3.6 Log
Tab is used for changing the code of the stored log point. Log tab is also used for saving log points.
Fig. 61. Log tab
Save pos
: (1...∞), green rectangle highlights the running number of a stored point.
•
Button saves the position with a selected code. Code is shown in the ”Code” button
(marked with green circle).
•
If position can't be determined accurately the application shows the dialog ”
Bad accuracy,
are you sure?
”
Enter point
(
Points can also be entered manually to the system.)
When pressing the ”Enter point” button coordinate input dialogue appears.
•
Coordinates
:
◦
X
,
Y
and
Z
can be entered manually
◦
“Get from the receiver”
◦
“Measuring point using
A
(L)
,
B
(S)
and
dZ”
(operator enter the data)
•
Finally press “Save point”.
•
Press “Close” to exit dialog.
•
Point is named (coded) by selected / entered code.
Coordinates can be entered manually or can be taken from the positioning device. Positioning
device coordinates (positioning antenna) are read by pressing the ”Get from the Receiver”. Point is
stored with current code by pressing ”Save point”.
Enter Code / Name
(Fig 61 green circle)
Saved points can be categorized by using different codes. Codes to be used are usually
determined by the surveyor (of the job site). The proper code can be entered by pressing the
button.
•
When button is pressed the “feature code list”-dialog opens and code can be entered, or
code can be selected from list (codelist has to be imported).
◦
Default Codelist can be taken in use: “
Settings
” → “
Installation settings
” → “
FCL
”:
select proper codelist and press “Import”. Codelist can be included in the project by
adding codelist file to project root.
•
Last used code is shown in the button.
Point name (description)
•
Button can be used for giving additional personal notes when storing points.
•
This additional name is given just once with the next point.
•
Information is used only for the operator
User Manual. Xsite PRO SPI 14.2 Page 48 / 77
Summary of Contents for XSITE PRO SPI 14.2
Page 1: ...XSITE PRO SPI 14 2 USER MANUAL Version 1 14 2 46 October 2018...
Page 33: ...Fig 36 Tilt bucket calibration User Manual Xsite PRO SPI 14 2 Page 30 77...
Page 76: ...User Manual Xsite PRO SPI 14 2 Page 73 77...
Page 77: ...User Manual Xsite PRO SPI 14 2 Page 74 77...
