Page 3
WINCH INSTALLATION
Step ( 3 )
Secure winch ( Fig. 2 ) to mounting kit or structural
support using bolts, lock washers and square
nuts supplied with winch.
Fig. 2 - Winch mounting
Step ( 4 )
Secure roller fairlead or hawse ( Fig. 2 ) to mounting plate or structural support using
hardware supplied
!
WARNING
!
CAUTION
!
Be sure that both the mounting plate and winch hardware have been
properly tightened.
No part of the vehicle ( skid plates, wiring, auxiliary lights, tires,etc. )
should impede the operation of your Novawinch. When mounting,
check all vehicle and winch parts for free operation. Be sure that the winch mounting
location does not significanty reduce ground clearance.
SOLENOID MOUNTING
1. The solenoid disconnects your winch from the battery when the vehicle is turned off.
2. The solenoid should be mounted close to the battery and in a location that is
clean and dry as possible.
Note: The solenoid should not be mounted in an orientation in which the contact
posts are in a downward position.
Explosion Drawing with
4500SR
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
2
21
23
24
26
27
28
29
30
31
22
25
34 33
32
35
36
37
44
41
38
39
42
43
45
46
40
47
Page 38
Summary of Contents for FENIX 25
Page 2: ......
