13
INSTALLATION OF THE APPLIANCE
The heater shall be installed and used according to the safe standard.
To avoid all dangers, follow the safety instructions.
- The installation must be done by the service agent or similarly qualified persons in order to
avoid a hazard.
-
Important!
Make sure that there are no electric cables or other installations (for example
water pipes) near the drill holes. Make sure that the appliance is securely and vertically
fitted to the wall.
Get two holes on the wall 2 m above the floor and near the corner more 0,25 m, be sure to
make the diameter just as same as the expanding pipe. Fix two screws on the expanding
pipe, keep the tips of the screws out for 10mm, and hang up the machine after the screws
are fixed enough.
