* FUNCTIONS
Water filter:
The filter with ion exchange resin can soften hard water and eliminate bacteria.
Before the first use, place the device at room temperature for half hour before
commissioning. It is recommended to use the device at 20 °C, relative humidity below 80%
RH. Use clean water at temperature of no more than 40 °C.
Check the water container, make sure it is clean and that it has no cracks, which may
affect the operation of the device.
Filter replacement (filter color depends on its model)
To change the UHF-21/UHF-18 filter, make sure that the water tank is empty or level
water is low enough to allow safe replacement. Before replacing the filter you should also
turn the unit off. Turn the tank with the water inlet facing upwards (Fig.1). Then unscrew
the filler cap (Fig. 2).
Fig. 1
Fig. 2
Unscrew the filter attached to the plug securing the water inlet to the container, then
remove the old filter from the cap and screw in the new filter (Fig. 3, 3.1 and 3.2).
Fig. 3
Fig. 3.1
Fig. 3
Fill the tank with water, close the cap with filter on the tank and put the tank on the device,
secure - the device is ready for use.
14
Summary of Contents for X-LINE UH 1800
Page 3: ...OPIS URZĄDZENIA 3 ...
Page 12: ...DEVICE DESCRIPTION 12 ...
