Novell EDIRECTORY 8.8 SP2 Manual Download | Manualshive

Page: 467 / 621

background image

Backing Up and Restoring Novell eDirectory

469

no

vd

ocx

(e

n)

6 Ap
ril 20

07

Each of them is named

backupincr.bk

, so when he copies them into the directory he

changes the filenames to

backupincr.mon.bk
backupincr.tues.bk
backupincr.wed.bk

NOTE:

Full and incremental backups aren't required to be in the same directory together, but

all the incremental backups must be in the same directory.

10. He uses iManager to restore eDirectory:

a. He goes into iManager and clicks

eDirectory Maintenance Utilities

>

Restore

.

b. He logs in to the server, using the context of the new temporary tree.

c. In the Restore Wizard - File Configuration screen, he does the following:

Enters

/adminfiles/restore

for the location where he placed the backup files.

Enters

/adminfiles/restore/restore.log

for the location where the restore

log should be created.

d. In the Restore Wizard - Optional screen, he does the following:

Checks

Restore Database

.

Checks

Restore Roll-Forward Logs

.

Enters the location of the roll-forward logs.
(This is the separate location that he created specifically to hold the roll-forward logs.
Because he placed them on a different hard drive than eDirectory, the hard drive failure
did not affect them and they are still available.)
Checks

Restore Security Files

Checks

Activate the Restored Database after Verification

.

Checks

Open the Database after Completion of Restore

.

Wants eDirectory to open if the restore verification is successful.

11. He starts the restore and enters the filenames of the incremental backup files when prompted.

12. The restore verification is successful, so the database opens, back in its original tree.

The restore verification was successful because roll-forward logs were running on the server
when the hard drive failed, and Jorge included the logs in the restore.

13. Jorge re-creates the roll-forward logs configuration on the server after the restore is complete,

then he creates a new full backup.
The settings are reset to the default during a restore, which means roll-forward logging is
turned off, so he has to turn it back on. The new full backup is necessary so that he is prepared
for any failures that might occur before the next unattended full backup is scheduled to take
place.

Jorge checks the way the server is running, and it appears to be normal.

«
...
465
466
467
468
469
...
»

Summary of Contents for EDIRECTORY 8.8 SP2














































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EDIRECTORY 8.8 SP2

DEVICE FILTER MAC

Brand: FARONICS Pages: 2

Altiware HPBX 5.0A

Brand: Altigen Pages: 490

D-NE1 - Portable Cd Player

Brand: Sony Pages: 2

ConferenceSuite

Brand: Polycom Pages: 2

Ramp Preview Controller

Brand: ARRI Pages: 46

Brand: Zing Magic Pages: 10

Brand: I.R.I.S. Pages: 2

RAPTOR 2500T-DL - RAPTOR OPENWINDOWS FOR SOLARIS INSTALLATION AND

Brand: Tech Source Pages: 2

RegistryBooster 2010

Brand: UNIBLUE Pages: 11

Brand: Mad Catz Pages: 16

Brand: ICP Pages: 8

Brand: Xerox Pages: 32

INTUITY Messaging Solutions

Brand: Lucent Technologies Pages: 80

ANTI-SPAM 3.0 -

Brand: KAPERSKY Pages: 153

Agilent NanoSuite 6.2

Brand: Agilent Technologies Pages: 4

READIRIS PRO 12

Brand: I.R.I.S. Pages: 2

Brand: Jabra Pages: 5

Psychoacoustic Analyzer PAZ

Brand: Waves Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands