Novell EDIRECTORY 8.8 SP2 Manual Download

Page: 505 / 621

SNMP Support for Novell eDirectory

507

ocx

6 Ap
ril 20

102

ndsSearch

A Search operation is performed.

Example:

Perform ldapsearch on the tree using LDAP tools.

103

ndsPartitionStateChange

A partition is created or deleted.

Example:

Create a new partition.

104

ndsRemoveBacklink

Unused external references are removed and the server sends a
remove backlink request to the server holding the object.

105

ndsLowLevelJoinPartition A low-level join is performed during merge partition operations.

Example:

Merge or join partitions using ConsoleOne, iManager, or LDAP
tools.

106

ndsCreateNameBase

An eDirectory namebase is created.

107

ndsChangeSecurityEqual
s

The Security Equals attribute is modified.

Example:

Change the security equivalent of any user and make it equal to
admin using ConsoleOne or iManager.

108

ndsRemoveEntry

An entry is removed from eDirectory.

Example:

Delete any user using ConsoleOne or iManager.

109

ndsCRCFailure

A CRC failure occurs when fragmented NCP requests are being
reconstructed.

110

ndsModifyEntry

An eDirectory entry is modified.

Example:

Modify attributes of any user using ConsoleOne or iManager.

111

ndsNewSchemaEpoch

The schema is reset using DSRepair.

Example:

Create a new schema epoch using ndsrepair -S -Ad on Linux and
UNIX.

112

ndsLowLevelSplitPartition A low-level split is performed when a partition is being created.

Example:

Create a partition using ConsoleOne, iManager, or LDAP tools.

113

ndsReplicaInTransition

A replica is added or removed.

Trap
Number

Trap Name

Trap Is Generated When

Summary of Contents for EDIRECTORY 8.8 SP2














































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EDIRECTORY 8.8 SP2

Reviews:

Related manuals for EDIRECTORY 8.8 SP2

Brands by name

Popular brands

Novell EDIRECTORY 8.8 SP2, Manual

Search results

Summary of Contents for EDIRECTORY 8.8 SP2

Reviews:

Related manuals for EDIRECTORY 8.8 SP2

Brands by name

Popular brands