manualshive.com logo in svg

Novell EDIRECTORY 8.8 SP5, Administration Manual

Gain full control over your network with Novell eDirectory 8.8 SP5. Easily manage user accounts, permissions, and resources with the comprehensive Administration Manual. Download this essential manual for free at 88.208.23.73:8080 and streamline your network administration processes today.

Share
Download
background image

194

Novell eDirectory 8.8 Administration Guide

n

ov

do

cx (e

n)

  22
 Ju

n

e 20
09

Š

Section 7.5.2, “No Schema Checks,” on page 194

Š

Section 7.5.3, “Insufficient Space on Hard-Drive,” on page 194

Š

Section 7.5.4, “Forced Termination,” on page 194

7.5.1  Duplicate Entries

Uploading ldif files having duplicate entries or having entries already present in the dib, without the 
-u option would cause the entry to be added more than once, leading to an inconsistent state of the 
dib. So if you are not sure if entries are repeated in the ldif or if they are present in dib before the 
bulkload, use the -u option during bulkload.

7.5.2  No Schema Checks

ldif2dib does not perform any schema checks. As a result, you can add an attribute to an object even 
if the attribute does not belong to the schema of the object. This would leave the dib in an 
inconsistent state. Use ldif2dib only when you are sure that the ldif data does not need schema 
checks.

7.5.3  Insufficient Space on Hard-Drive

Behaviour of ldif2dib is undefined when there is not enough space on the hard-drive for all the 
objects being loaded. You need to make sure that there is sufficient space for all the objects before 
starting the bulkload.

7.5.4  Forced Termination

Forcefully terminating the ldif2dib process can leave the dib in an inconsistent state. Use the Escape 
key to gracefully exit the bulkload.

7.5.5  Terminal Resizing

Resizing the terminal during bulkload can distort the statistics displayed on the user interface. 
Terminal resizing should be avoided while bulkload is in progress.

Summary of Contents for EDIRECTORY 8.8 SP5









































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EDIRECTORY 8.8 SP5

MACROMEDIA FLASH 8-FLASH Tutorials Manual preview
FLASH 8-FLASH
Brand: MACROMEDIA Pages: 292
MACROMEDIA BREEZE 5 Manual preview
BREEZE 5
Brand: MACROMEDIA Pages: 26
MACROMEDIA BREEZE Installation Manual preview
BREEZE
Brand: MACROMEDIA Pages: 32
Ulead COOL 3D-PLUG-IN MADNESS II Manual preview
COOL 3D-PLUG-IN MADNESS II
Brand: Ulead Pages: 10
MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual preview
COLDFUSION 5-ADVANCED ADMINISTRATION
Brand: MACROMEDIA Pages: 372
Aruba Networks ClearPass Guest 3.9 Deployment Manual preview
ClearPass Guest 3.9
Brand: Aruba Networks Pages: 518
Novell DATA SYNCHRONIZER - UPDATE 1 Installation Manual preview
DATA SYNCHRONIZER - UPDATE 1
Brand: Novell Pages: 9
Arturia Minimoog V Quick Start Manual preview
Minimoog V
Brand: Arturia Pages: 10
Billion English CO1 User Manual preview
English CO1
Brand: Billion Pages: 42
Campbell PC400 User Manual preview
PC400
Brand: Campbell Pages: 250
Cisco Unity Express 8.0 Voice-Mail System User Manual preview
Unity Express 8.0 Voice-Mail System
Brand: Cisco Pages: 50
Cisco TELEPRESENCE MANAGEMENT SUITE PROVISIONING Troubleshooting Manual preview
TELEPRESENCE MANAGEMENT SUITE PROVISIONING
Brand: Cisco Pages: 16
Cisco Unified MeetingPlace H.323/SIP Administrator'S Manual preview
Unified MeetingPlace H.323/SIP
Brand: Cisco Pages: 54
Cisco PVDM2 24DM - Digital Modem Module User Manual preview
PVDM2 24DM - Digital Modem Module
Brand: Cisco Pages: 48
Cisco TELEPRESENCE MANAGEMENT SUITE SECURE SERVER Configuration Manual preview
TELEPRESENCE MANAGEMENT SUITE SECURE SERVER
Brand: Cisco Pages: 34
Cisco SGACL Configuration Manual preview
SGACL
Brand: Cisco Pages: 8
Cisco Unified Videoconferencing Manager Installation Manual preview
Unified Videoconferencing Manager
Brand: Cisco Pages: 22
Cisco SMART BUSINESS COMMUNICATIONS SYSTEM Feature Reference preview
SMART BUSINESS COMMUNICATIONS SYSTEM
Brand: Cisco Pages: 27

Brands by name

Popular brands

Load more brands