manualshive.com logo in svg

Novell EDIRECTORY 8.8 SP5, Administration Manual

Gain full control over your network with Novell eDirectory 8.8 SP5. Easily manage user accounts, permissions, and resources with the comprehensive Administration Manual. Download this essential manual for free at 88.208.23.73:8080 and streamline your network administration processes today.

Share
Download
background image

440

Novell eDirectory 8.8 Administration Guide

n

ov

do

cx (e

n)

  22
 Ju

n

e 20
09

17.3.4  Cautionary Note: Removing eDirectory Also Removes 
the Roll-Forward Logs

If you remove eDirectory from your server, the roll-forward log directory and all the logs in it are 
also removed. If you want to be able to use the logs for restoring the server in the future, before 
removing eDirectory you must first copy the roll-forward logs to another location.

17.4  Preparing for a Restore

The most important part of restoring the eDirectory database is making sure it is complete. Before 
restoring an eDirectory database to a server, ensure the prerequisites have been met as described in 

“Prerequisites for Restoring” on page 440

. If you are not sure how to gather the right backup files, 

see 

“Locating the Right Backup Files for a Restore” on page 441

.

17.4.1  Prerequisites for Restoring

‰

All servers that share a replica with the server to be restored are up and communicating. This 
allows the restore verification process to check with servers that participate in the same replica 
ring.

‰

You have gathered all the backup files you need: 

Š

The full backup and subsequent incremental backup files are copied to one directory on 
the server to be restored.

Š

All roll-forward logs since the last backup are in one directory on the server to be restored.
If this server participates in a replica ring, you must make sure all the roll-forward logs 
created since the last backup are in one directory on the server, with the same filenames 
they had when they were created.

See 

“Locating the Right Backup Files for a Restore” on page 441

.

NOTE: 

If you do not have backup files for the server, use XBrowse to query eDirectory to help 

you recover server information. You must do this before you remove the Server object or any 
associated objects from the tree. XBrowse and additional information is available from the 

Novell Support Web site, Solution 2960653 (http://support.novell.com/servlet/tidfinder/
2960653)

.

‰

You have installed eDirectory, in a new temporary tree.
You bring up the server in a new tree at first because you will create the server with the same 
name it had before the failure, and you don't want to cause confusion in the original tree by 
putting the newly installed server in the tree before the restore has re-created the server's 
complete identity. Completing the restore process for the database will put the server back into 
its original tree.

‰

(Conditional) If you are using roll-forward logging on this server, plan to re-create your 
configuration for roll-forward logging after the restore, to make sure it is turned on and the logs 
are being saved in a fault-tolerant location. After turning on the roll-forward logs, you must 
also do a new full backup. 
The restore process turns off roll-forward logging and resets the configuration for roll-forward 
logging back to the default.
The new full backup is necessary so that you are prepared for any failures that might occur 
before the next unattended full backup is scheduled to take place.

Summary of Contents for EDIRECTORY 8.8 SP5









































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EDIRECTORY 8.8 SP5

Canon PowerShot SD10 Digital ELPH Software Starter Manual preview
PowerShot SD10 Digital ELPH
Brand: Canon Pages: 124
Samsung 4116 - SCX B/W Laser Manual preview
4116 - SCX B/W Laser
Brand: Samsung Pages: 14
Samsung 2252W - Printer - B/W Manual preview
2252W - Printer - B/W
Brand: Samsung Pages: 10
Allied Telesis AlliedWare Plus 5.2.1 Software Reference Manual preview
AlliedWare Plus 5.2.1
Brand: Allied Telesis Pages: 1294
Lexmark Apps User Manual preview
Apps
Brand: Lexmark Pages: 3
Omron CX-SUPERVISOR V3 Brochure preview
CX-SUPERVISOR V3
Brand: Omron Pages: 5
M-Audio Fast Track Pro Quick Start Manual preview
Fast Track Pro
Brand: M-Audio Pages: 5
Allied Telesis AT-9400 User Manual preview
AT-9400
Brand: Allied Telesis Pages: 668
AMX AXD-CP4/A Specifications preview
AXD-CP4/A
Brand: AMX Pages: 3
F-SECURE PSB - ADMINISTRATORS GUIDE FOR RESELLERS Manual preview
PSB - ADMINISTRATORS GUIDE FOR RESELLERS
Brand: F-SECURE Pages: 48
LEI accessories MAPCREATE USA 6.3 - ADDENDUM Manual preview
MAPCREATE USA 6.3 - ADDENDUM
Brand: LEI accessories Pages: 1
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual preview
256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010
Brand: Autodesk Pages: 1638
Zennio Z41 User Manual preview
Z41
Brand: Zennio Pages: 15
IBM Tivoli and Cisco User Manual preview
Tivoli and Cisco
Brand: IBM Pages: 516
TANDBERG GW Dataport Command Interface D13202 User Manual preview
GW Dataport Command Interface D13202
Brand: TANDBERG Pages: 32
GarrettCom Magnum MNS-6K Cli User'S Manual preview
Magnum MNS-6K
Brand: GarrettCom Pages: 329
Navman F-Series F20 Manual Del Usuario preview
F-Series F20
Brand: Navman Pages: 10
Tascam CD-R624M Installation Manual preview
CD-R624M
Brand: Tascam Pages: 9

Brands by name

Popular brands

Load more brands