manualshive.com logo in svg

Novell EDIRECTORY 8.8 SP5, Administration Manual

Gain full control over your network with Novell eDirectory 8.8 SP5. Easily manage user accounts, permissions, and resources with the comprehensive Administration Manual. Download this essential manual for free at 88.208.23.73:8080 and streamline your network administration processes today.

Share
Download
background image

Maintaining Novell eDirectory

519

n

ov

do

cx (e

n)

  22
 Ju

n

e 20
09

19.1.3  Deploying ARC

ARC is usually deployed on a server-to-server basis. Those servers that are ARC - enabled can know 
the new costing information. 

You should patch all the servers to 8.7.3.9 ftf3 and eDirectory 8.8 servers to 8.8.2 version and then 
enable ARC on each server in the environment.

Deployment Considerations 

It is not useful to enable ARC on all servers. 

Figure 19-4

 shows a situation that could impact the 

efficiency of LDAP servers. In the figure, S4 holds a copy of the green partition, but not of the blue 
partition. Any chaining LDAP request that requires information from the blue partition needs to 
walk to the S1, S2, or S3 servers to be fulfilled. This works in most cases, and ARC is designed for 
just such situations. 

Figure 19-4   

ARC Deployment Considerations

However, performing specific LDAP operations could be difficult. Although it is possible to add a 
user, for example, Bob.Blue.Novell, the operation might fail when you try to immediately return to 
modify Bob. The figure shows Bob added on S2, but modifying Bob on S3 has failed because S3 has 
not yet synchronized with S2, so S3 has not yet received Bob. ARC has the capability to direct you 
to a different server, because ARC is more dynamic than the original costing method.

This configuration works well in scenarios where the server costs don't vary much and they don't 
have problems synchronizing. Disabling ARC on S4 resolves this issue. 

Summary of Contents for EDIRECTORY 8.8 SP5









































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EDIRECTORY 8.8 SP5

Canon EOS-1D Mark II Digial Software Manual preview
EOS-1D Mark II Digial
Brand: Canon Pages: 2
Inalp Networks SmartWare R2.00 Software Configuration Manual preview
SmartWare R2.00
Brand: Inalp Networks Pages: 321
Draytek Smart Monitor User Manual preview
Smart Monitor
Brand: Draytek Pages: 73
360 Systems Maxx 2470-HD Operation Manual preview
Maxx 2470-HD
Brand: 360 Systems Pages: 58
AMX AXCENTWire Instruction Manual preview
AXCENTWire
Brand: AMX Pages: 24
FieldServer FS-8700-16 Driver Manual preview
FS-8700-16
Brand: FieldServer Pages: 32
DigiDesign Pro Tools M-Powered Basic Manual preview
Pro Tools M-Powered
Brand: DigiDesign Pages: 22
palmOne VersaMail User Manual preview
VersaMail
Brand: palmOne Pages: 114
UMAX Technologies PowerColor User Manual preview
PowerColor
Brand: UMAX Technologies Pages: 127
Waves PuigTec MEQ-5 User Manual preview
PuigTec MEQ-5
Brand: Waves Pages: 16
AMX AXD-CP4/A Instruction Manual preview
AXD-CP4/A
Brand: AMX Pages: 84
Dell Precision M6500 Setup And Features Information preview
Precision M6500
Brand: Dell Pages: 8
Dell PowerEdge 2321DS Specifications preview
PowerEdge 2321DS
Brand: Dell Pages: 2
Avaya Wallboard User Manual preview
Wallboard
Brand: Avaya Pages: 59
Western Digital WDBMWV0020BBK Quick Start Manual preview
WDBMWV0020BBK
Brand: Western Digital Pages: 5
McAfee VIRUSSCAN 8.7I Release Note preview
VIRUSSCAN 8.7I
Brand: McAfee Pages: 14
McAfee INTERNET SECURITY 2009 Datasheet preview
INTERNET SECURITY 2009
Brand: McAfee Pages: 2
McAfee MTP08EMB3RUA - Total Protection - PC Quick Start Manual preview
MTP08EMB3RUA - Total Protection - PC
Brand: McAfee Pages: 19

Brands by name

Popular brands

Load more brands