Configuring the Monitor Agent
1023
n
ov
do
cx (e
n)
22
Ju
n
e 20
09
At the Windows
Monitor Agent server console
:
1
Select the root agent group to set up SNMP trap notification defaults for all monitored agents.
or
Select any agent group to set up SNMP trap notification for the agents in the selected group.
or
Select any agent to set up SNMP trap notification for that individual agent.
2
Click
Configuration
>
Notification
.
or
On Linux, at the
Monitor Agent Web console
, select one or more agents, then click
Preferences
>
Setup
to display the
Notify
settings.
Unless you selected the root agent group,
Use Parent Notification Options
is selected and all
options are dimmed. Deselect
Use Parent Notification Options
to set up notification for an
agent group or individual agent.
3
Select
Send SNMP Traps
, then click
OK
.
4
Make sure that the Monitor Agent is properly configured for SNMP, as described in
Section 63.3.2, “Configuring the Monitor Agent for SNMP,” on page 1016
.
63.8 Configuring Authentication and Intruder
Lockout for the Monitor Web Console
Accessing GroupWise agent status information from your Web browser is very convenient.
However, you might want to limit access to that information. You can configure the Monitor Agent
to request a username and password before allowing users to access the Monitor Web console. In
addition, you can configure the Monitor Agent to detect break-in attempts in the form of repeated
unsuccessful logins.
