Installing Secure Gateway
Setting up a Secure Gateway cluster
Intellisync Mobile Suite Secure Gateway Administrator’s Guide
1–8
Adding Secure Gateway servers to the cluster
To add the servers to the Secure Gateway cluster, complete the following steps:
1. From the shared properties path, open the sgsharedprop.properties file.
2. Define the Secure Gateway cluster servers by entering the following property
fore each server:
SecureGatewayAddress<
1-N
>=<
DNS hostname or IP address
>
3. Restart the Secure Gateway service on each server in the cluster.
A locked copy of the shared properties file is loaded on each server in the
cluster.
If you are setting up a cluster outside of the shared network, you must copy
the sgsharedprop.properties to each server. Any changes to the
sgsharedprop.properties file will have to be manually updated on each server.
