14
Novell Support Advisor Administration Guide
Specify the "Connection Type" and subtype that you will be creating.
Enter the starting IP Address range that you will be searching on.
Select the "Octets to Scan" or "Address Range" radio button for the search parameters.
Octets to Scan will scan all addresses (0 - 256) for each octet field checked.
Address Range will scan from the starting IP Address specified to the ending address.
On Run it may take some time to successfully complete depending on your network speed and
the parameters defined for the search.
On finish you may see a list of devices that were found to be up and listening on the address
range and port specified. Click to add the connections that you want to attempt to run an
analysis against.
