Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual Download | Manualshive

Page: 175 / 674

background image

Creating Policies

175

n

ov

do

cx (e

n)

11
Ju

ly 20

08

10

Click

Finish

to create the policy as configured according to the settings on the Summary page.

If you click

Finish

, the Text File policy is created but it does not have devices assigned or a

schedule specified. At some point in the future, you need to configure additional options for the
policy by continuing with

Section 17.4, “Assigning Policies,” on page 182

.

or
Click

Next

to display the Policy Assignment page to perform the following tasks:

Specify assignments for this policy

Specify the schedule for this policy

Specify groups for this policy

11

Assign the policy to the devices.

11a

Click

Add

to browse for and select the appropriate Server or Workstation objects.

You can also select Folder or Group objects.

11b

Click the down-arrow next to

Servers

or

Workstations

to expand the list, then click the

underlined link in the

Name

column to select the desired objects and display their names

in the

Selected

list box.

Assigning a policy to a Group object is the preferred method of assigning the policy.
Assigning the policy to a large number of objects (for example, more than 250) might
cause increased server utilization.

11c

Click

OK

.

12

Click

Next

to display the Policy Schedule page, then select the schedule to apply to the

assignments.
The settings you configure on this page determine when the policy is applied to devices.
See

Section 15.3, “Schedules,” on page 122

for information about the available schedules.

13

Click

Next

to display the Policy Groups page.

«
...
173
174
175
176
177
...
»

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008



































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008

PowerShot G10 - Digital Camera - Compact

Brand: Canon Pages: 49

Brand: Baracoda Pages: 9

ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER

Brand: KAPERSKY Pages: 295

Brand: Brother Pages: 24

MacBroidery„ Embroidery Lettering Software for Mac

Brand: Brother Pages: 56

Brand: Brother Pages: 48

Brand: Brother Pages: 272

Brand: Brother Pages: 200

ANTI-VIRUS - FOR MICROSOFT EXCHANGE

Brand: F-SECURE Pages: 115

Brand: Sonifex Pages: 68

Brand: Daikin Pages: 16

FLASH 8-USING FLASH

Brand: MACROMEDIA Pages: 678

Brand: Magellan Pages: 14

DEEP FREEZE ENTERPRISE - TREND MICRO OFFICESCAN...

Brand: FARONICS Pages: 17

AltiWare ACC 5.1

Brand: Altigen Pages: 383

AltiWare ACC 5.2

Brand: Altigen Pages: 399

Brand: Panasonic Pages: 102

Anti-Virus Free Edition 2011

Brand: AVG Pages: 141

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands